Ultra Hardware 44253 Standard Duty Commercial Cylindrical Clutch Lever Lockset

Ultra Hardware 44253 Standard Duty Commercial Cylindrical Clutch Lever Lockset
Please find this product at http://absupply.net.
This video is to bring you a closer look at the Ultra Hardware 44253 Standard Duty Commercial Cylindrical Clutch Lever Lockset.
This is a typical commercial Grade 2 cylindrical lockset with the return to the back of the door, which is required for ADA compliance.
This is the satin chrome finish.
You have your rosettes.
It is built to emulate a very common deign of locks.
We happen to use this type of lock in residential applications where they want a lever lock, although the construction of this is a bit of overkill for a residential application, but still very appropriate.
Overkill meaning it is made to handle more usage than a residential application would typically give.
Also, we typically sell these in light duty commercial applications such as retail spaces, fast food restaurants, these places are going to get more than light duty commercial use.
These locks certainly seem to hold up.
A lock like this that is in this price range is not intended really for anything beyond very light duty commercial use.
However, they do seem to last.
They will eventually need to be replaced, in my opinion.
This is a push turn button style.
When it is unlocked you can push the button in and it locks the outside, until you rotate the inside handle and then it automatically unlocks the outside.
Or you can push the button in from the inside and then turn it and the outside will always be locked even if you try to turn the inside handle.
2-3/4″ latch bolt, standard on commercial steel doors or doors prepped for a 161 lock prep.
4-7/8″ strike.
Two keys included.
Spanner wrench will come with this, this allows you to remove the levers and ultimately allow you to remove the cylinder should you need to.
You use this tool by depressing the tabs to take the knobs off.
Screw package is included, this would be for through bolting the door, you would drill a hole at 12 and 6 (this is the recommended way of installation).
There is so much torque that can be put on the lever that you can spin the lock and the screws at 12 and 6 will prevent that.
There is a link below this video with instructions and a template.
All your screws for the latch bolt and strike plate are included.
Very straight forward installation on the lock.
The diameter of the rosette is about 3-3/8″.
The overall length of the lever is about 5″.
If you have any questions on the Ultra Hardware 44253 Standard Duty Commercial Cylindrical Clutch Lever Lockset or any other product by Ultra Hardware please feel free to reach out to us.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>